3310A-2RS1

The SKF 3310A-2RS1 is a high-performance, deep groove ball bearing designed for heavy-duty industrial applications. This bearing features a single row of balls between two rows of equal size outer races, ensuring efficient load distribution and robustness.

The bearing's inner race is made of chrome steel, which provides excellent wear resistance and durability. The outer races are made of carbon steel and are through-hardened to enhance their load-carrying capacity and resistance to bending. The rolling elements are made of chrome steel balls, which offer high strength and hardness.

The bearing's dimensions are 62mm in outside diameter, 22mm in width, and 30mm in length. It has a nominal contact angle of 0 degrees and a contact angle deviation of /- 1 degree. The bearing's basic load rating is 1,250,000 N, and its maximum operating speed is 6,000 rpm.

The SKF 3310A-2RS1 comes with a protective grease filling that ensures lubrication and reduces friction. The bearing's sealing system consists of two lip seals, one on each side, which prevent contaminants from entering and protect the bearing from external damage. The seals are made of nitrile rubber and can withstand temperatures between -40 C and 100 C.

The bearing's cage is made of polyamide, which offers good dimensional stability and rigidity. The cage design ensures proper ball distribution and facilitates efficient lubrication.

The SKF 3310A-2RS1 is suitable for use in various industrial applications, such as pumps, compressors, conveyors, and mixers. It can handle high loads and operate at high speeds, making it an ideal choice for demanding applications where reliability and durability are essential.

In conclusion, the SKF 3310A-2RS1 is a robust, high-performance deep groove ball bearing designed for heavy-duty industrial applications. Its chrome steel inner race, carbon steel outer races, and chrome steel balls offer excellent wear resistance and durability. Its protective grease filling and lip seals ensure lubrication and protection from contaminants. Its efficient design and high load rating make it an excellent choice for a wide range of industrial applications.

The SKF 3310A-2RS1 is a popular ball bearing unit used in various industrial applications due to its high load capacity, precision, and durability. However, like any other industrial component, it comes with its advantages and disadvantages.

1. High Load Capacity: This ball bearing unit has a high load carrying capacity, making it suitable for heavy-duty applications.

2. Precision: The SKF 3310A-2RS1 is manufactured to high precision standards, ensuring accurate and reliable performance.

3. Long Service Life: The ball bearing unit is designed to last for an extended period, reducing the need for frequent replacements.

4. Excellent Corrosion Resistance: The bearing rings and balls are made of high-quality steel, which provides excellent resistance to corrosion.

5. Sealed Design: The SKF 3310A-2RS1 comes with a sealed design that prevents the entry of contaminants, thereby increasing its service life.

1. High Cost: The SKF 3310A-2RS1 is a premium product and can be quite expensive compared to other bearing units in the market.

2. Complex Installation: The bearing unit can be challenging to install due to its large size and precise requirements.

3. Limited Availability: The SKF 3310A-2RS1 may not be readily available in all markets, making it difficult to source for some applications.

The SKF 3310A-2RS1 is a high-performance ball bearing unit with several advantages, including a high load capacity, precision, long service life, corrosion resistance, and sealed design. However, it also has some disadvantages, such as a high cost, complex installation, and limited availability.

If your application requires a high load capacity, precision, and durability, then the SKF 3310A-2RS1 is an excellent choice. However, if cost is a significant factor, or if the application does not require the same level of performance, then you may want to consider other, less expensive bearing units. Ultimately, the decision to buy the SKF 3310A-2RS1 should be based on your specific application requirements and budget.

Details:

Engineered using the latest technology to ensure product lasts longer in service. Engineered with a factory-like design for effortless installation, ensuring perfect match your vehicle. Manufactured following strict OE standards to work like the original component. Designed specifically for trucks, trailers, and buses.

Made of high-quality components for durability, reliability, and performance. Skf 3310A-2RS1: part number: 3310A-2RS1 manufacturer.

specifications inboardfuel:

• brand: Skf
• mpn: 3310a-2rs1
• part type: Intake Fuel
• upc: 316573932475

general inboardfuel:

• category: Boat Parts > Inboard Engines Components > Intake Fuel Systems

seller inboardfuel:

• city: los angeles, california
• rating: 98.6%
• # reviews: 57398

payments inboardfuel:

• other
• credit card: discover
• wallet: apple-pay

offer inboardfuel:

• sold #: 16
• options: ship-to-home
• started: november 3, 2025
• availability: in stock
• best offers: true
• in stock #: 5
• prices: $51.99–$341.85
• item condition:
  • New
  • New – Open box

returns inboardfuel:

• time: 30 days
• paid by: seller
• policy: returns accepted

shipping inboardfuel:

• type: fixed
• service: standard
• class: standard
• transit: 3-7 days