AF133749P03

FUEL PUMP, Afpaparts20

0 offer available: $
AF133749P03 AFPAPARTS20 Electric Fuel Pump Npsf CarterAF133749P03 AFPAPARTS20 Electric Fuel Pump Npsf Carter #2AF133749P03 AFPAPARTS20 Electric Fuel Pump Npsf Carter #3

The Carter P4594 AFPAParts20 AF133749P03 electric fuel pump is an essential component in the fuel delivery system of various automobiles. This 12-volt, 72 gallons per hour (GPH) fuel pump is designed for cars with a flow rate requirement between 5 to 9 1/4 gallons per minute (GPM) and a National Pipe Thread (NPT) connection of 3/4 inch.

This electric fuel pump, manufactured by Carter, offers reliable and efficient performance in delivering fuel to the engine. The pump features a durable cast aluminum housing, which not only enhances its structural strength but also maintains a constant temperature to ensure optimal fuel flow.

With a maximum discharge pressure of 5.5 psi at full flow and a power consumption of 12.2 amps, the Carter P4594 AFPAParts20 AF133749P03 fuel pump is capable of supplying ample fuel pressure to meet the demands of modern engines. Integrated protection against dry-run conditions ensures longer pump life and preserves the integrity of the fuel system.

Smooth and quiet in operation, the Carter electric fuel pump comes with a built-in thermal relief valve and premium seat material, designed for superior flow and combat corrosion. Featuring a simple plug-and-play installation, it is compatible with various vehicle applications, making it a versatile choice for auto enthusiasts and professionals alike.

The Carter P4594 AFPAParts20 AF133749P03 electric fuel pump is engineered to deliver consistent and dependable performance, ensuring your vehicle maintains optimal fuel supply. For those seeking a high-quality, reliable fuel pump replacement, the Carter P4594 is a top choice.

Pros and Cons of Buying Carter P4594 12V Electric Fuel Pump (AFPAPARTS20, AF133749P03) - 72GPH, 5-9 1/4 NPSF

The Carter P4594 electric fuel pump with model numbers AFPAParts20 and AF133749P03 is a popular choice for those seeking to upgrade or replace their existing fuel pumps. However, as with any purchase, there are advantages and disadvantages to consider before making a decision.

Pros:

1. High flow rate: This Carter electric fuel pump delivers a flow rate of 72 gallons per hour. This is much higher than standard pumps, making it suitable for high-performance vehicles or those with larger fuel tanks.

2. Versatility: The Carter P4594 can be used in a wide range of applications, from cars and trucks to boats and industrial machinery. Its compatibility with various fuel systems, including gasoline and diesel, adds to its versatility.

3. Compact design: This pump is relatively small, making it easy to install and fit in tight spaces. Its lightweight design also makes it less labor-intensive to transport and handle.

4. Durability: Carter is known for producing high-quality, reliable fuel pumps. The P4594 model is no exception. It features an all-metal construction that can withstand the rigors of continuous use and extreme conditions.

5. Easy installation: This electric fuel pump comes with complete wiring harnesses, ensuring straightforward installation. Clinched-style fittings make connections secure and leak-free.

Cons:

1. Higher cost: The Carter P4594 electric fuel pump is more expensive than some other pumps on the market. However, its high performance and durability may justify the increased cost for some customers.

2. Requires a 12V power source: This pump operates on a 12V power source, which may require additional wiring and modifications for some vehicles. Ensure your installation setup is compatible before purchasing.

3. Limited compatibility with certain systems: Though versatile, this specific Carter electric fuel pump model may not be suitable for all fuel systems. Always double-check compatibility before purchasing.

Conclusion:

The Carter P4594 12V Electric Fuel Pump (AFPAParts20, AF133749P03) is a high-performance, reliable, and versatile choice for those who need a fuel pump capable of delivering impressive flow rates. Despite its higher cost and compatibility limitations, the advantages provided by this durable and easy-to-install pump make it an attractive option for those seeking enhanced fuel delivery capabilities. Make sure to confirm compatibility with your fuel system before making a purchase.

Details:

You can take your pump apart with a screwdriver and rebuilt it yourself, following directions on the kit. If your fuel pump does needs replacing, a rebuilt one is often as good new one, and lot less expensive. Avoid extended idling: extended idling can overheat the fuel pump and shorten its life. The test only takes a few minutes.

Method 1 performing an electrical test. 2.check the voltage at pump itself. Try to avoid extended idling whenever possible. Just because you're getting juice from the circuit doesn't mean that its to pump itself, which makes it important check voltage there as well.

If no fuses are blown, have a helper turn the key while you listen for fuel pump relay ing on. 4.have a helper rev the engine while you check gauge. 1.check the fuel pump fuse. If no power is making it to the fuel pump, then check pump relay circuit.

If you notice any issues with engine performance, it is important to take your vehicle a mechanic as soon possible have diagnosed and repaired. If it looks good, check the rest of fuses related to fuel system for signs being blown and replace them, if necessary. It should be guaranteed at least three months. 1.eliminate the filter as a possibility.

This can water down the gasoline and cause corrosion. Let the engine warm up slightly, then check pressure both at idle speed and rated listed in your pump specifications. There are several things you can do to help prevent your fuel pump from going bad. Regularly maintain your vehicle: this includes things like changing the oil and air filter, as well making sure engine is tuned up.

Be sure to use a good quality gasoline that has the correct octane rating for your vehicle. Use good-quality gasoline: using low-quality gasoline can shorten the life of your fuel pump. Locate your fuel pump test point, which is usually near the injectors, and locate point at hooks up with filter injector rail. New list item.

2.get a fuel pressure gauge. Avoid running your vehicle low on fuel: this can cause the fuel pump to overwork and wear out prematurely. Inspect the screen for debris and replace filter if necessary by blowing through outlet side of into a white rag or towel. Check to make sure that the power wire shows full voltage and grounding its grounded properly.

Often, its not the pump itself that fails to function, but power supplies it. 3.hook the pressure gauge to fuel pump test fitting. If the filter gets clogged with sediment, you can have trouble accelerating and might suspect your fuel pump has got a problem. Fuel stabilizers keep the gasoline fresh and help prevent corrosion.

Method 2 performing a fuel pressure test. Proper precautions should be taken for safe testing and diagnosis. Test for source voltage , to determine whether or not the good charge that's leaving fuse is getting pump. Keep your fuel tank full: keeping full can help prevent condensation from forming inside.

To check it, remove the filter from vehicle and drain excessive fuel. If the fuse blows again, a direct short is present and will need to be diagnosed. Pull it out and inspect for signs of failure. Use a fuel stabilizer: adding stabilizer to your gas can help prevent it from going bad.

If you re feeling adventurous, some manufacturers supply rebuild kits. The pressure should match the specifications listed in repair manual, and increase as you rev engine. Use a short piece of rubber hose on the filter inlet. Keep a fire extinguisher nearby while working on or testing the fuel system.

Perform a drop test using voltmeter. If you don't know the rated speed, just rev engine and see how pressure reacts. A bad fuel pump can lead to engine performance issues and even cause your vehicle break down. Item specifics: type: fuel pump, drive: electrical, fuel: diesel/ gasoline, placement on vehicle tank, flow rate: 72, pressure: 5-9 psi, voltage : 12v, manufacturer part number: AF133749P03, items included: mounting hardware, warranty: 1 year, performance: no, universal fitment brand: AFPAPARTS20, oe/oem: P4594.

There should be a separation joint or test port, where the pressure gauge attaches. Blow through the filter inlet, paying attention to resistance, which should be minimal.

specifications inboardfuel:

general inboardfuel:

shipping inboardfuel:

seller inboardfuel:

offer inboardfuel:

returns inboardfuel:

payments inboardfuel:

rating: 99.2% out of 100 based on 95 user ratings.
Similar Items: